fix: [nomad-step-2] S2.5 review — gate policies/auth/import on --empty; reject --empty + --import-* (#883)

Addresses review #907 blocker: docs/nomad-migration.md claimed
--empty "skips policies/auth/import/deploy" but _disinto_init_nomad
had no $empty gate around those blocks — operators reaching the
"cluster-only escape hatch" would still invoke vault-apply-policies.sh
and vault-nomad-auth.sh, contradicting the runbook.

Changes:
- _disinto_init_nomad: exit 0 immediately after cluster-up when
  --empty is set, in both dry-run and real-run branches. Only the
  cluster-up plan appears; no policies, no auth, no import, no
  deploy. Matches the docs.
- disinto_init: reject --empty combined with any --import-* flag.
  --empty discards the import step, so the combination silently
  does nothing (worse failure mode than a clear error up front).
  Symmetric to the existing --empty vs --with check.
- Pre-flight existence check for policies/auth scripts now runs
  unconditionally on the non-empty path (previously gated on
  --import-*), matching the unconditional invocation. Import-script
  check stays gated on --import-*.

Non-blocking observation also addressed: the pre-flight guard
comment + actual predicate were inconsistent ("unconditionally
invoke policies+auth" but only checked on import). Now the
predicate matches: [ "$empty" != "true" ] gates policies/auth,
and an inner --import-* guard gates the import script.

Tests (+3):
- --empty --dry-run shows no S2.x sections (negative assertions)
- --empty --import-env rejected
- --empty --import-sops --age-key rejected

30/30 nomad tests pass; shellcheck clean.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

.env.example

@@ -32,13 +32,10 @@ FORGE_URL=http://localhost:3000             # [CONFIG] local Forgejo instance
 #   - FORGE_PASS_DEV_QWEN2
 # Name conversion: tr 'a-z-' 'A-Z_' (lowercase→UPPER, hyphens→underscores).
 # The compose generator looks these up via the agent's `forge_user` field in
-# the project TOML. The pre-existing `dev-qwen` llama agent uses
-# FORGE_TOKEN_LLAMA / FORGE_PASS_LLAMA (kept for backwards-compat with the
-# legacy `ENABLE_LLAMA_AGENT=1` single-agent path).
+# the project TOML. Configure local-model agents via [agents.X] sections in
+# projects/*.toml — this is the canonical activation path.
 FORGE_TOKEN=                               # [SECRET] dev-bot API token (default for all agents)
 FORGE_PASS=                                # [SECRET] dev-bot password for git HTTP push (#361)
-FORGE_TOKEN_LLAMA=                         # [SECRET] dev-qwen API token (for agents-llama)
-FORGE_PASS_LLAMA=                          # [SECRET] dev-qwen password for git HTTP push
 FORGE_REVIEW_TOKEN=                        # [SECRET] review-bot API token
 FORGE_REVIEW_PASS=                         # [SECRET] review-bot password for git HTTP push
 FORGE_PLANNER_TOKEN=                       # [SECRET] planner-bot API token
@@ -107,13 +104,6 @@ FORWARD_AUTH_SECRET=                      # [SECRET] Shared secret for Caddy ↔
 # Store all project secrets here so formulas reference env vars, never hardcode.
 BASE_RPC_URL=                              # [SECRET] on-chain RPC endpoint
 
-# ── Local Qwen dev agent (optional) ──────────────────────────────────────
-# Set ENABLE_LLAMA_AGENT=1 to emit agents-llama in docker-compose.yml.
-# Requires a running llama-server reachable at ANTHROPIC_BASE_URL.
-# See docs/agents-llama.md for details.
-ENABLE_LLAMA_AGENT=0                       # [CONFIG] 1 = enable agents-llama service
-ANTHROPIC_BASE_URL=                        # [CONFIG] e.g. http://host.docker.internal:8081
-
 # ── Tuning ────────────────────────────────────────────────────────────────
 CLAUDE_TIMEOUT=7200                        # [CONFIG] max seconds per Claude invocation
 

AGENTS.md

@@ -122,8 +122,7 @@ bash dev/phase-test.sh
 | Reproduce | `docker/reproduce/` | Bug reproduction using Playwright MCP | `formulas/reproduce.toml` |
 | Triage | `docker/reproduce/` | Deep root cause analysis | `formulas/triage.toml` |
 | Edge dispatcher | `docker/edge/` | Polls ops repo for vault actions, executes via Claude sessions | `docker/edge/dispatcher.sh` |
-| agents-llama | `docker/agents/` (same image) | Local-Qwen dev agent (`AGENT_ROLES=dev`), gated on `ENABLE_LLAMA_AGENT=1` | [docs/agents-llama.md](docs/agents-llama.md) |
-| agents-llama-all | `docker/agents/` (same image) | Local-Qwen all-roles agent (all 7 roles), profile `agents-llama-all` | [docs/agents-llama.md](docs/agents-llama.md) |
+| Local-model agents | `docker/agents/` (same image) | Local llama-server agents configured via `[agents.X]` sections in project TOML | [docs/agents-llama.md](docs/agents-llama.md) |
 
 > **Vault:** Being redesigned as a PR-based approval workflow (issues #73-#77).
 > See [docs/VAULT.md](docs/VAULT.md) for the vault PR workflow details.

bin/disinto

@@ -89,6 +89,9 @@ Init options:
   --yes                Skip confirmation prompts
   --rotate-tokens      Force regeneration of all bot tokens/passwords (idempotent by default)
   --dry-run            Print every intended action without executing
+  --import-env <path>  (nomad) Path to .env file for import into Vault KV (S2.5)
+  --import-sops <path> (nomad) Path to sops-encrypted .env.vault.enc for import (S2.5)
+  --age-key <path>     (nomad) Path to age keyfile (required with --import-sops) (S2.5)
 
 Hire an agent options:
   --formula <path>     Path to role formula TOML (default: formulas/<role>.toml)
@@ -664,8 +667,12 @@ prompt_admin_password() {
 # `sudo disinto init ...` directly.
 _disinto_init_nomad() {
   local dry_run="${1:-false}" empty="${2:-false}" with_services="${3:-}"
+  local import_env="${4:-}" import_sops="${5:-}" age_key="${6:-}"
   local cluster_up="${FACTORY_ROOT}/lib/init/nomad/cluster-up.sh"
   local deploy_sh="${FACTORY_ROOT}/lib/init/nomad/deploy.sh"
+  local vault_policies_sh="${FACTORY_ROOT}/tools/vault-apply-policies.sh"
+  local vault_auth_sh="${FACTORY_ROOT}/lib/init/nomad/vault-nomad-auth.sh"
+  local vault_import_sh="${FACTORY_ROOT}/tools/vault-import.sh"
 
   if [ ! -x "$cluster_up" ]; then
     echo "Error: ${cluster_up} not found or not executable" >&2
@@ -677,6 +684,35 @@ _disinto_init_nomad() {
     exit 1
   fi
 
+  # --empty short-circuits after cluster-up: no policies, no auth, no
+  # import, no deploy. It's the "cluster-only escape hatch" for debugging
+  # (docs/nomad-migration.md). Caller-side validation already rejects
+  # --empty combined with --with or any --import-* flag, so reaching
+  # this branch with those set is a bug in the caller.
+  #
+  # On the default (non-empty) path, vault-apply-policies.sh and
+  # vault-nomad-auth.sh are invoked unconditionally — they are idempotent
+  # and cheap to re-run, and subsequent --with deployments depend on
+  # them. vault-import.sh is invoked only when an --import-* flag is set.
+  local import_any=false
+  if [ -n "$import_env" ] || [ -n "$import_sops" ]; then
+    import_any=true
+  fi
+  if [ "$empty" != "true" ]; then
+    if [ ! -x "$vault_policies_sh" ]; then
+      echo "Error: ${vault_policies_sh} not found or not executable" >&2
+      exit 1
+    fi
+    if [ ! -x "$vault_auth_sh" ]; then
+      echo "Error: ${vault_auth_sh} not found or not executable" >&2
+      exit 1
+    fi
+    if [ "$import_any" = true ] && [ ! -x "$vault_import_sh" ]; then
+      echo "Error: ${vault_import_sh} not found or not executable" >&2
+      exit 1
+    fi
+  fi
+
   # --empty and default both invoke cluster-up today. Log the requested
   # mode so the dispatch is visible in factory bootstrap logs — Step 1
   # will branch on $empty to gate the job-deployment path.
@@ -686,7 +722,7 @@ _disinto_init_nomad() {
     echo "nomad backend: default (cluster-up; jobs deferred to Step 1)"
   fi
 
-  # Dry-run: print cluster-up plan + deploy.sh plan
+  # Dry-run: print cluster-up plan + policies/auth/import plan + deploy.sh plan
   if [ "$dry_run" = "true" ]; then
     echo ""
     echo "── Cluster-up dry-run ─────────────────────────────────"
@@ -694,6 +730,45 @@ _disinto_init_nomad() {
     "${cmd[@]}" || true
     echo ""
 
+    # --empty skips policies/auth/import/deploy — cluster-up only, no
+    # workloads. The operator-visible dry-run plan must match the real
+    # run, so short-circuit here too.
+    if [ "$empty" = "true" ]; then
+      exit 0
+    fi
+
+    # Vault policies + auth are invoked on every nomad real-run path
+    # regardless of --import-* flags (they're idempotent; S2.1 + S2.3).
+    # Mirror that ordering in the dry-run plan so the operator sees the
+    # full sequence Step 2 will execute.
+    echo "── Vault policies dry-run ─────────────────────────────"
+    echo "[policies] [dry-run] ${vault_policies_sh} --dry-run"
+    echo ""
+    echo "── Vault auth dry-run ─────────────────────────────────"
+    echo "[auth] [dry-run] ${vault_auth_sh}"
+    echo ""
+
+    # Import plan: one line per --import-* flag that is actually set.
+    # Printing independently (not in an if/elif chain) means that all
+    # three flags appearing together each echo their own path — the
+    # regression that bit prior implementations of this issue (#883).
+    if [ "$import_any" = true ]; then
+      echo "── Vault import dry-run ───────────────────────────────"
+      [ -n "$import_env" ]  && echo "[import] --import-env   env file:  ${import_env}"
+      [ -n "$import_sops" ] && echo "[import] --import-sops  sops file: ${import_sops}"
+      [ -n "$age_key" ]     && echo "[import] --age-key      age key:   ${age_key}"
+      local -a import_dry_cmd=("$vault_import_sh")
+      [ -n "$import_env" ]  && import_dry_cmd+=("--env" "$import_env")
+      [ -n "$import_sops" ] && import_dry_cmd+=("--sops" "$import_sops")
+      [ -n "$age_key" ]     && import_dry_cmd+=("--age-key" "$age_key")
+      import_dry_cmd+=("--dry-run")
+      echo "[import] [dry-run] ${import_dry_cmd[*]}"
+      echo ""
+    else
+      echo "[import] no --import-env/--import-sops — skipping; set them or seed kv/disinto/* manually before deploying secret-dependent services"
+      echo ""
+    fi
+
     if [ -n "$with_services" ]; then
       echo "── Deploy services dry-run ────────────────────────────"
       echo "[deploy] services to deploy: ${with_services}"
@@ -721,7 +796,7 @@ _disinto_init_nomad() {
     exit 0
   fi
 
-  # Real run: cluster-up + deploy services
+  # Real run: cluster-up + policies + auth + (optional) import + deploy
   local -a cluster_cmd=("$cluster_up")
   if [ "$(id -u)" -eq 0 ]; then
     "${cluster_cmd[@]}" || exit $?
@@ -733,6 +808,62 @@ _disinto_init_nomad() {
     sudo -n -- "${cluster_cmd[@]}" || exit $?
   fi
 
+  # --empty short-circuits here: cluster-up only, no policies/auth/import
+  # and no deploy. Matches the dry-run plan above and the docs/runbook.
+  if [ "$empty" = "true" ]; then
+    exit 0
+  fi
+
+  # Apply Vault policies (S2.1) — idempotent, safe to re-run.
+  echo ""
+  echo "── Applying Vault policies ────────────────────────────"
+  local -a policies_cmd=("$vault_policies_sh")
+  if [ "$(id -u)" -eq 0 ]; then
+    "${policies_cmd[@]}" || exit $?
+  else
+    if ! command -v sudo >/dev/null 2>&1; then
+      echo "Error: vault-apply-policies.sh must run as root and sudo is not installed" >&2
+      exit 1
+    fi
+    sudo -n -- "${policies_cmd[@]}" || exit $?
+  fi
+
+  # Configure Vault JWT auth + Nomad workload identity (S2.3) — idempotent.
+  echo ""
+  echo "── Configuring Vault JWT auth ─────────────────────────"
+  local -a auth_cmd=("$vault_auth_sh")
+  if [ "$(id -u)" -eq 0 ]; then
+    "${auth_cmd[@]}" || exit $?
+  else
+    if ! command -v sudo >/dev/null 2>&1; then
+      echo "Error: vault-nomad-auth.sh must run as root and sudo is not installed" >&2
+      exit 1
+    fi
+    sudo -n -- "${auth_cmd[@]}" || exit $?
+  fi
+
+  # Import secrets if any --import-* flag is set (S2.2).
+  if [ "$import_any" = true ]; then
+    echo ""
+    echo "── Importing secrets into Vault ───────────────────────"
+    local -a import_cmd=("$vault_import_sh")
+    [ -n "$import_env" ]  && import_cmd+=("--env" "$import_env")
+    [ -n "$import_sops" ] && import_cmd+=("--sops" "$import_sops")
+    [ -n "$age_key" ]     && import_cmd+=("--age-key" "$age_key")
+    if [ "$(id -u)" -eq 0 ]; then
+      "${import_cmd[@]}" || exit $?
+    else
+      if ! command -v sudo >/dev/null 2>&1; then
+        echo "Error: vault-import.sh must run as root and sudo is not installed" >&2
+        exit 1
+      fi
+      sudo -n -- "${import_cmd[@]}" || exit $?
+    fi
+  else
+    echo ""
+    echo "[import] no --import-env/--import-sops — skipping; set them or seed kv/disinto/* manually before deploying secret-dependent services"
+  fi
+
   # Deploy services if requested
   if [ -n "$with_services" ]; then
     echo ""
@@ -777,6 +908,16 @@ _disinto_init_nomad() {
     echo ""
     echo "── Summary ────────────────────────────────────────────"
     echo "Cluster:     Nomad+Vault cluster is up"
+    echo "Policies:    applied (Vault ACL)"
+    echo "Auth:        Vault JWT auth + Nomad workload identity configured"
+    if [ "$import_any" = true ]; then
+      local import_desc=""
+      [ -n "$import_env" ]  && import_desc+="${import_env} "
+      [ -n "$import_sops" ] && import_desc+="${import_sops} "
+      echo "Imported:    ${import_desc% }"
+    else
+      echo "Imported:    (none — seed kv/disinto/* manually before deploying secret-dependent services)"
+    fi
     echo "Deployed:    ${with_services}"
     if echo "$with_services" | grep -q "forgejo"; then
       echo "Ports:       forgejo: 3000"
@@ -803,6 +944,7 @@ disinto_init() {
 
   # Parse flags
   local branch="" repo_root="" ci_id="0" auto_yes=false forge_url_flag="" bare=false rotate_tokens=false use_build=false dry_run=false backend="docker" empty=false with_services=""
+  local import_env="" import_sops="" age_key=""
   while [ $# -gt 0 ]; do
     case "$1" in
       --branch)        branch="$2"; shift 2 ;;
@@ -819,6 +961,12 @@ disinto_init() {
       --yes)           auto_yes=true; shift ;;
       --rotate-tokens) rotate_tokens=true; shift ;;
       --dry-run)       dry_run=true; shift ;;
+      --import-env)    import_env="$2"; shift 2 ;;
+      --import-env=*)  import_env="${1#--import-env=}"; shift ;;
+      --import-sops)   import_sops="$2"; shift 2 ;;
+      --import-sops=*) import_sops="${1#--import-sops=}"; shift ;;
+      --age-key)       age_key="$2"; shift 2 ;;
+      --age-key=*)     age_key="${1#--age-key=}"; shift ;;
       *) echo "Unknown option: $1" >&2; exit 1 ;;
     esac
   done
@@ -859,11 +1007,40 @@ disinto_init() {
     exit 1
   fi
 
+  # --import-* flag validation (S2.5). These three flags form an import
+  # triple and must be consistent before dispatch: sops encryption is
+  # useless without the age key to decrypt it, so either both --import-sops
+  # and --age-key are present or neither is. --import-env alone is fine
+  # (it just imports the plaintext dotenv). All three flags are nomad-only.
+  if [ -n "$import_sops" ] && [ -z "$age_key" ]; then
+    echo "Error: --import-sops requires --age-key" >&2
+    exit 1
+  fi
+  if [ -n "$age_key" ] && [ -z "$import_sops" ]; then
+    echo "Error: --age-key requires --import-sops" >&2
+    exit 1
+  fi
+  if { [ -n "$import_env" ] || [ -n "$import_sops" ] || [ -n "$age_key" ]; } \
+     && [ "$backend" != "nomad" ]; then
+    echo "Error: --import-env, --import-sops, and --age-key require --backend=nomad" >&2
+    exit 1
+  fi
+
+  # --empty is the cluster-only escape hatch — it skips policies, auth,
+  # import, and deploy. Pairing it with --import-* silently does nothing,
+  # which is a worse failure mode than a clear error. Reject explicitly.
+  if [ "$empty" = true ] \
+     && { [ -n "$import_env" ] || [ -n "$import_sops" ] || [ -n "$age_key" ]; }; then
+    echo "Error: --empty and --import-env/--import-sops/--age-key are mutually exclusive" >&2
+    exit 1
+  fi
+
   # Dispatch on backend — the nomad path runs lib/init/nomad/cluster-up.sh
   # (S0.4). The default and --empty variants are identical today; Step 1
   # will branch on $empty to add job deployment to the default path.
   if [ "$backend" = "nomad" ]; then
-    _disinto_init_nomad "$dry_run" "$empty" "$with_services"
+    _disinto_init_nomad "$dry_run" "$empty" "$with_services" \
+                        "$import_env" "$import_sops" "$age_key"
     # shellcheck disable=SC2317  # _disinto_init_nomad always exits today;
     # `return` is defensive against future refactors.
     return
@@ -977,7 +1154,6 @@ p.write_text(text)
     echo ""
     echo "[ensure] Forgejo admin user 'disinto-admin'"
     echo "[ensure] 8 bot users: dev-bot, review-bot, planner-bot, gardener-bot, vault-bot, supervisor-bot, predictor-bot, architect-bot"
-    echo "[ensure] 2 llama bot users: dev-qwen, dev-qwen-nightly"
     echo "[ensure] .profile repos for all bots"
     echo "[ensure] repo ${forge_repo} on Forgejo with collaborators"
     echo "[run]    preflight checks"
@@ -1173,19 +1349,6 @@ p.write_text(text)
     echo "Config:  CLAUDE_CODE_DISABLE_NONESSENTIAL_TRAFFIC=1 saved to .env"
   fi
 
-  # Write local-Qwen dev agent env keys with safe defaults (#769)
-  if ! grep -q '^ENABLE_LLAMA_AGENT=' "$env_file" 2>/dev/null; then
-    cat >> "$env_file" <<'LLAMAENVEOF'
-
-# Local Qwen dev agent (optional) — set to 1 to enable
-ENABLE_LLAMA_AGENT=0
-FORGE_TOKEN_LLAMA=
-FORGE_PASS_LLAMA=
-ANTHROPIC_BASE_URL=
-LLAMAENVEOF
-    echo "Config:  ENABLE_LLAMA_AGENT keys written to .env (disabled by default)"
-  fi
-
   # Create labels on remote
   create_labels "$forge_repo" "$forge_url"
 

docker/agents/entrypoint.sh

@@ -17,6 +17,38 @@ set -euo pipefail
 #   - predictor: every 24 hours (288 iterations * 5 min)
 #   - supervisor: every SUPERVISOR_INTERVAL seconds (default: 1200 = 20 min)
 
+# ── Migration check: reject ENABLE_LLAMA_AGENT ───────────────────────────────
+# #846: The legacy ENABLE_LLAMA_AGENT env flag is no longer supported.
+# Activation is now done exclusively via [agents.X] sections in project TOML.
+# If this legacy flag is detected, fail immediately with a migration message.
+if [ "${ENABLE_LLAMA_AGENT:-}" = "1" ]; then
+  cat <<'MIGRATION_ERR'
+FATAL: ENABLE_LLAMA_AGENT is no longer supported.
+
+The legacy ENABLE_LLAMA_AGENT=1 flag has been removed (#846).
+Activation is now done exclusively via [agents.X] sections in projects/*.toml.
+
+To migrate:
+  1. Remove ENABLE_LLAMA_AGENT from your .env or .env.enc file
+  2. Add an [agents.<name>] section to your project TOML:
+
+     [agents.dev-qwen]
+     base_url = "http://your-llama-server:8081"
+     model = "unsloth/Qwen3.5-35B-A3B"
+     api_key = "sk-no-key-required"
+     roles = ["dev"]
+     forge_user = "dev-qwen"
+     compact_pct = 60
+     poll_interval = 60
+
+  3. Run: disinto init
+  4. Start the agent: docker compose up -d agents-dev-qwen
+
+See docs/agents-llama.md for full details.
+MIGRATION_ERR
+  exit 1
+fi
+
 DISINTO_BAKED="/home/agent/disinto"
 DISINTO_LIVE="/home/agent/repos/_factory"
 DISINTO_DIR="$DISINTO_BAKED"  # start with baked copy; switched to live checkout after bootstrap

docs/agents-llama.md

@@ -2,9 +2,12 @@
 
 Local-model agents run the same agent code as the Claude-backed agents, but
 connect to a local llama-server (or compatible OpenAI-API endpoint) instead of
-the Anthropic API. This document describes the current activation flow using
+the Anthropic API. This document describes the canonical activation flow using
 `disinto hire-an-agent` and `[agents.X]` TOML configuration.
 
+> **Note:** The legacy `ENABLE_LLAMA_AGENT=1` env flag has been removed (#846).
+> Activation is now done exclusively via `[agents.X]` sections in project TOML.
+
 ## Overview
 
 Local-model agents are configured via `[agents.<name>]` sections in

docs/nomad-migration.md

@@ -0,0 +1,124 @@
+<!-- last-reviewed: (new file, S2.5 #883) -->
+# Nomad+Vault migration — cutover-day runbook
+
+`disinto init --backend=nomad` is the single entry-point that turns a fresh
+LXC (with the disinto repo cloned) into a running Nomad+Vault cluster with
+policies applied, JWT workload-identity auth configured, secrets imported
+from the old docker stack, and services deployed.
+
+## Cutover-day invocation
+
+On the new LXC, as root (or an operator with NOPASSWD sudo):
+
+```bash
+# Copy the plaintext .env + sops-encrypted .env.vault.enc + age keyfile
+# from the old box first (out of band — SSH, USB, whatever your ops
+# procedure allows). Then:
+
+sudo ./bin/disinto init \
+  --backend=nomad \
+  --import-env   /tmp/.env \
+  --import-sops  /tmp/.env.vault.enc \
+  --age-key      /tmp/keys.txt \
+  --with         forgejo
+```
+
+This runs, in order:
+
+1. **`lib/init/nomad/cluster-up.sh`** (S0) — installs Nomad + Vault
+   binaries, writes `/etc/nomad.d/*`, initializes Vault, starts both
+   services, waits for the Nomad node to become ready.
+2. **`tools/vault-apply-policies.sh`** (S2.1) — syncs every
+   `vault/policies/*.hcl` into Vault as an ACL policy. Idempotent.
+3. **`lib/init/nomad/vault-nomad-auth.sh`** (S2.3) — enables Vault's
+   JWT auth method at `jwt-nomad`, points it at Nomad's JWKS, writes
+   one role per policy, reloads Nomad so jobs can exchange
+   workload-identity tokens for Vault tokens. Idempotent.
+4. **`tools/vault-import.sh`** (S2.2) — reads `/tmp/.env` and the
+   sops-decrypted `/tmp/.env.vault.enc`, writes them to the KV paths
+   matching the S2.1 policy layout (`kv/disinto/bots/*`, `kv/disinto/shared/*`,
+   `kv/disinto/runner/*`). Idempotent (overwrites KV v2 data in place).
+5. **`lib/init/nomad/deploy.sh forgejo`** (S1) — validates + runs the
+   `nomad/jobs/forgejo.hcl` jobspec. Forgejo reads its admin creds from
+   Vault via the `template` stanza (S2.4).
+
+## Flag summary
+
+| Flag | Meaning |
+|---|---|
+| `--backend=nomad` | Switch the init dispatcher to the Nomad+Vault path (instead of docker compose). |
+| `--empty` | Bring the cluster up, skip policies/auth/import/deploy. Escape hatch for debugging. |
+| `--with forgejo[,…]` | Deploy these services after the cluster is up. |
+| `--import-env PATH` | Plaintext `.env` from the old stack. Optional. |
+| `--import-sops PATH` | Sops-encrypted `.env.vault.enc` from the old stack. Requires `--age-key`. |
+| `--age-key PATH` | Age keyfile used to decrypt `--import-sops`. Requires `--import-sops`. |
+| `--dry-run` | Print the full plan (cluster-up + policies + auth + import + deploy) and exit. Touches nothing. |
+
+### Flag validation
+
+- `--import-sops` without `--age-key` → error.
+- `--age-key` without `--import-sops` → error.
+- `--import-env` alone (no sops) → OK (imports just the plaintext `.env`).
+- `--backend=docker` with any `--import-*` flag → error.
+- `--empty` with any `--import-*` flag → error (mutually exclusive: `--empty`
+  skips the import step, so pairing them silently discards the import
+  intent).
+
+## Idempotency
+
+Every layer is idempotent by design. Re-running the same command on an
+already-provisioned box is a no-op at every step:
+
+- **Cluster-up:** second run detects running `nomad`/`vault` systemd
+  units and state files, skips re-init.
+- **Policies:** byte-for-byte compare against on-server policy text;
+  "unchanged" for every untouched file.
+- **Auth:** skips auth-method create if `jwt-nomad/` already enabled,
+  skips config write if the JWKS + algs match, skips server.hcl write if
+  the file on disk is identical to the repo copy.
+- **Import:** KV v2 writes overwrite in place (same path, same keys,
+  same values → no new version).
+- **Deploy:** `nomad job run` is declarative; same jobspec → no new
+  allocation.
+
+## Dry-run
+
+```bash
+./bin/disinto init --backend=nomad \
+  --import-env /tmp/.env \
+  --import-sops /tmp/.env.vault.enc \
+  --age-key /tmp/keys.txt \
+  --with forgejo \
+  --dry-run
+```
+
+Prints the five-section plan — cluster-up, policies, auth, import,
+deploy — with every path and every argv that would be executed. No
+network, no sudo, no state mutation. See
+`tests/disinto-init-nomad.bats` for the exact output shape.
+
+## No-import path
+
+If you already have `kv/disinto/*` seeded by other means (manual
+`vault kv put`, a replica, etc.), omit all three `--import-*` flags.
+`disinto init --backend=nomad --with forgejo` still applies policies,
+configures auth, and deploys — but skips the import step with:
+
+```
+[import] no --import-env/--import-sops — skipping; set them or seed kv/disinto/* manually before deploying secret-dependent services
+```
+
+Forgejo's template stanza will fail to render (and thus the allocation
+will stall) until those KV paths exist — so either import them or seed
+them first.
+
+## Secret hygiene
+
+- Never log a secret value. The CLI only prints paths (`--import-env`,
+  `--age-key`) and KV *paths* (`kv/disinto/bots/review/token`), never
+  the values themselves. `tools/vault-import.sh` is the only thing that
+  reads the values, and it pipes them directly into Vault's HTTP API.
+- The age keyfile must be mode 0400 — `vault-import.sh` refuses to
+  source a keyfile with looser permissions.
+- `VAULT_ADDR` must be localhost during import — the import tool
+  refuses to run against a remote Vault, preventing accidental exposure.

formulas/release.sh

@@ -178,8 +178,8 @@ log "Tagged disinto/agents:${RELEASE_VERSION}"
 
 log "Step 6/6: Restarting agent containers"
 
-docker compose stop agents agents-llama 2>/dev/null || true
-docker compose up -d agents agents-llama
+docker compose stop agents 2>/dev/null || true
+docker compose up -d agents
 log "Agent containers restarted"
 
 # ── Done ─────────────────────────────────────────────────────────────────

formulas/release.toml

@@ -189,10 +189,10 @@ Restart agent containers to use the new image.
    - docker compose pull agents
 
 2. Stop and remove existing agent containers:
-   - docker compose down agents agents-llama 2>/dev/null || true
+   - docker compose down agents
 
 3. Start agents with new image:
-   - docker compose up -d agents agents-llama
+   - docker compose up -d agents
 
 4. Wait for containers to be healthy:
    - for i in {1..30}; do
@@ -203,7 +203,7 @@ Restart agent containers to use the new image.
    - done
 
 5. Verify containers are running:
-   - docker compose ps agents agents-llama
+   - docker compose ps agents
 
 6. Log restart:
    - echo "Restarted agents containers"

lib/action-vault.sh

@@ -128,7 +128,6 @@ vault_request() {
   # Validate TOML content
   local tmp_toml
   tmp_toml=$(mktemp /tmp/vault-XXXXXX.toml)
-  trap 'rm -f "$tmp_toml"' RETURN
 
   printf '%s' "$toml_content" > "$tmp_toml"
 
@@ -136,6 +135,7 @@ vault_request() {
   local vault_env="${FACTORY_ROOT:-$(cd "$(dirname "${BASH_SOURCE[0]}")/.." && pwd)}/action-vault/vault-env.sh"
   if [ ! -f "$vault_env" ]; then
     echo "ERROR: vault-env.sh not found at $vault_env" >&2
+    rm -f "$tmp_toml"
     return 1
   fi
 
@@ -145,11 +145,15 @@ vault_request() {
   if ! source "$vault_env"; then
     FORGE_TOKEN="${_saved_forge_token:-}"
     echo "ERROR: failed to source vault-env.sh" >&2
+    rm -f "$tmp_toml"
     return 1
   fi
   # Restore caller's FORGE_TOKEN after validation
   FORGE_TOKEN="${_saved_forge_token:-}"
 
+  # Set trap AFTER sourcing vault-env.sh to avoid RETURN trap firing during source
+  trap 'rm -f "$tmp_toml"' RETURN
+
   # Run validation
   if ! validate_vault_action "$tmp_toml"; then
     echo "ERROR: TOML validation failed" >&2

lib/forge-setup.sh

@@ -356,16 +356,6 @@ setup_forge() {
     [predictor-bot]="FORGE_PREDICTOR_PASS"
     [architect-bot]="FORGE_ARCHITECT_PASS"
   )
-  # Llama bot users (local-model agents) — separate from main agents
-  # Each llama agent gets its own Forgejo user, token, and password
-  local -A llama_token_vars=(
-    [dev-qwen]="FORGE_TOKEN_LLAMA"
-    [dev-qwen-nightly]="FORGE_TOKEN_LLAMA_NIGHTLY"
-  )
-  local -A llama_pass_vars=(
-    [dev-qwen]="FORGE_PASS_LLAMA"
-    [dev-qwen-nightly]="FORGE_PASS_LLAMA_NIGHTLY"
-  )
 
   local bot_user bot_pass token token_var pass_var
 
@@ -515,159 +505,12 @@ setup_forge() {
     fi
   done
 
-  # Create llama bot users and tokens (local-model agents)
-  # These are separate from the main agents and get their own credentials
-  echo ""
-  echo "── Setting up llama bot users ────────────────────────────"
-
-  local llama_user llama_pass llama_token llama_token_var llama_pass_var
-  for llama_user in "${!llama_token_vars[@]}"; do
-    llama_token_var="${llama_token_vars[$llama_user]}"
-    llama_pass_var="${llama_pass_vars[$llama_user]}"
-
-    # Check if token already exists in .env
-    local token_exists=false
-    if _token_exists_in_env "$llama_token_var" "$env_file"; then
-      token_exists=true
-    fi
-
-    # Check if password already exists in .env
-    local pass_exists=false
-    if _pass_exists_in_env "$llama_pass_var" "$env_file"; then
-      pass_exists=true
-    fi
-
-    # Check if llama bot user exists on Forgejo
-    local llama_user_exists=false
-    if curl -sf --max-time 5 \
-      -H "Authorization: token ${admin_token}" \
-      "${forge_url}/api/v1/users/${llama_user}" >/dev/null 2>&1; then
-      llama_user_exists=true
-    fi
-
-    # Skip token/password regeneration if both exist in .env and not forcing rotation
-    if [ "$token_exists" = true ] && [ "$pass_exists" = true ] && [ "$rotate_tokens" = false ]; then
-      echo "  ${llama_user} token and password preserved (use --rotate-tokens to force)"
-      # Still export the existing token for use within this run
-      local existing_token existing_pass
-      existing_token=$(grep "^${llama_token_var}=" "$env_file" | head -1 | cut -d= -f2-)
-      existing_pass=$(grep "^${llama_pass_var}=" "$env_file" | head -1 | cut -d= -f2-)
-      export "${llama_token_var}=${existing_token}"
-      export "${llama_pass_var}=${existing_pass}"
-      continue
-    fi
-
-    # Generate new credentials if:
-    # - Token doesn't exist (first run)
-    # - Password doesn't exist (first run)
-    # - --rotate-tokens flag is set (explicit rotation)
-    if [ "$llama_user_exists" = false ]; then
-      # User doesn't exist - create it
-      llama_pass="llama-$(head -c 16 /dev/urandom | base64 | tr -dc 'a-zA-Z0-9' | head -c 20)"
-      echo "Creating llama bot user: ${llama_user}"
-      local create_output
-      if ! create_output=$(_forgejo_exec forgejo admin user create \
-        --username "${llama_user}" \
-        --password "${llama_pass}" \
-        --email "${llama_user}@disinto.local" \
-        --must-change-password=false 2>&1); then
-        echo "Error: failed to create llama bot user '${llama_user}':" >&2
-        echo "  ${create_output}" >&2
-        exit 1
-      fi
-      # Forgejo 11.x ignores --must-change-password=false on create;
-      # explicitly clear the flag so basic-auth token creation works.
-      _forgejo_exec forgejo admin user change-password \
-        --username "${llama_user}" \
-        --password "${llama_pass}" \
-        --must-change-password=false
-
-      # Verify llama bot user was actually created
-      if ! curl -sf --max-time 5 \
-        -H "Authorization: token ${admin_token}" \
-        "${forge_url}/api/v1/users/${llama_user}" >/dev/null 2>&1; then
-        echo "Error: llama bot user '${llama_user}' not found after creation" >&2
-        exit 1
-      fi
-      echo "  ${llama_user} user created"
-    else
-      # User exists - reset password if needed
-      echo "  ${llama_user} user exists"
-      if [ "$rotate_tokens" = true ] || [ "$pass_exists" = false ]; then
-        llama_pass="llama-$(head -c 16 /dev/urandom | base64 | tr -dc 'a-zA-Z0-9' | head -c 20)"
-        _forgejo_exec forgejo admin user change-password \
-          --username "${llama_user}" \
-          --password "${llama_pass}" \
-          --must-change-password=false || {
-          echo "Error: failed to reset password for existing llama bot user '${llama_user}'" >&2
-          exit 1
-        }
-        echo "  ${llama_user} password reset for token generation"
-      else
-        # Password exists, get it from .env
-        llama_pass=$(grep "^${llama_pass_var}=" "$env_file" | head -1 | cut -d= -f2-)
-      fi
-    fi
-
-    # Generate token via API (basic auth as the llama user)
-    # First, delete any existing tokens to avoid name collision
-    local existing_llama_token_ids
-    existing_llama_token_ids=$(curl -sf \
-      -u "${llama_user}:${llama_pass}" \
-      "${forge_url}/api/v1/users/${llama_user}/tokens" 2>/dev/null \
-      | jq -r '.[].id // empty' 2>/dev/null) || existing_llama_token_ids=""
-
-    # Delete any existing tokens for this user
-    if [ -n "$existing_llama_token_ids" ]; then
-      while IFS= read -r tid; do
-        [ -n "$tid" ] && curl -sf -X DELETE \
-          -u "${llama_user}:${llama_pass}" \
-          "${forge_url}/api/v1/users/${llama_user}/tokens/${tid}" >/dev/null 2>&1 || true
-      done <<< "$existing_llama_token_ids"
-    fi
-
-    llama_token=$(curl -sf -X POST \
-      -u "${llama_user}:${llama_pass}" \
-      -H "Content-Type: application/json" \
-      "${forge_url}/api/v1/users/${llama_user}/tokens" \
-      -d "{\"name\":\"disinto-${llama_user}-token\",\"scopes\":[\"all\"]}" 2>/dev/null \
-      | jq -r '.sha1 // empty') || llama_token=""
-
-    if [ -z "$llama_token" ]; then
-      echo "Error: failed to create API token for '${llama_user}'" >&2
-      exit 1
-    fi
-
-    # Store token in .env under the llama-specific variable name
-    if grep -q "^${llama_token_var}=" "$env_file" 2>/dev/null; then
-      sed -i "s|^${llama_token_var}=.*|${llama_token_var}=${llama_token}|" "$env_file"
-    else
-      printf '%s=%s\n' "$llama_token_var" "$llama_token" >> "$env_file"
-    fi
-    export "${llama_token_var}=${llama_token}"
-    echo "  ${llama_user} token generated and saved (${llama_token_var})"
-
-    # Store password in .env for git HTTP push (#361)
-    # Forgejo 11.x API tokens don't work for git push; password auth does.
-    if grep -q "^${llama_pass_var}=" "$env_file" 2>/dev/null; then
-      sed -i "s|^${llama_pass_var}=.*|${llama_pass_var}=${llama_pass}|" "$env_file"
-    else
-      printf '%s=%s\n' "$llama_pass_var" "$llama_pass" >> "$env_file"
-    fi
-    export "${llama_pass_var}=${llama_pass}"
-    echo "  ${llama_user} password saved (${llama_pass_var})"
-  done
-
   # Create .profile repos for all bot users (if they don't already exist)
   # This runs the same logic as hire-an-agent Step 2-3 for idempotent setup
   echo ""
   echo "── Setting up .profile repos ────────────────────────────"
 
   local -a bot_users=(dev-bot review-bot planner-bot gardener-bot vault-bot supervisor-bot predictor-bot architect-bot)
-  # Add llama bot users to .profile repo creation
-  for llama_user in "${!llama_token_vars[@]}"; do
-    bot_users+=("$llama_user")
-  done
   local bot_user
 
   for bot_user in "${bot_users[@]}"; do
@@ -775,15 +618,6 @@ setup_forge() {
         -d "{\"permission\":\"${bot_perm}\"}" >/dev/null 2>&1 || true
     done
 
-    # Add llama bot users as write collaborators for local-model agents
-    for llama_user in "${!llama_token_vars[@]}"; do
-      curl -sf -X PUT \
-        -H "Authorization: token ${admin_token:-${FORGE_TOKEN}}" \
-        -H "Content-Type: application/json" \
-        "${forge_url}/api/v1/repos/${repo_slug}/collaborators/${llama_user}" \
-        -d '{"permission":"write"}' >/dev/null 2>&1 || true
-    done
-
     # Add disinto-admin as admin collaborator
     curl -sf -X PUT \
       -H "Authorization: token ${admin_token:-${FORGE_TOKEN}}" \

lib/generators.sh

@@ -438,136 +438,6 @@ services:
 
 COMPOSEEOF
 
-  # ── Conditional agents-llama block (ENABLE_LLAMA_AGENT=1) ──────────────
-  # Local-Qwen dev agent — gated on ENABLE_LLAMA_AGENT so factories without
-  # a local llama endpoint don't try to start it.  See docs/agents-llama.md.
-  if [ "${ENABLE_LLAMA_AGENT:-0}" = "1" ]; then
-    cat >> "$compose_file" <<'LLAMAEOF'
-
-  agents-llama:
-    build:
-      context: .
-      dockerfile: docker/agents/Dockerfile
-    # Rebuild on every up (#887): makes docker/agents/ source changes reach this
-    # container without a manual \`docker compose build\`. Cache-fast when clean.
-    pull_policy: build
-    container_name: disinto-agents-llama
-    restart: unless-stopped
-    security_opt:
-      - apparmor=unconfined
-    volumes:
-      - agent-data:/home/agent/data
-      - project-repos:/home/agent/repos
-      - ${CLAUDE_SHARED_DIR:-/var/lib/disinto/claude-shared}:${CLAUDE_SHARED_DIR:-/var/lib/disinto/claude-shared}
-      - ${CLAUDE_CONFIG_FILE:-${HOME}/.claude.json}:/home/agent/.claude.json:ro
-      - ${CLAUDE_BIN_DIR}:/usr/local/bin/claude:ro
-      - ${AGENT_SSH_DIR:-${HOME}/.ssh}:/home/agent/.ssh:ro
-      - ${SOPS_AGE_DIR:-${HOME}/.config/sops/age}:/home/agent/.config/sops/age:ro
-      - woodpecker-data:/woodpecker-data:ro
-    environment:
-      FORGE_URL: http://forgejo:3000
-      FORGE_REPO: ${FORGE_REPO:-disinto-admin/disinto}
-      FORGE_TOKEN: ${FORGE_TOKEN_LLAMA:-}
-      FORGE_PASS: ${FORGE_PASS_LLAMA:-}
-      FORGE_BOT_USERNAMES: ${FORGE_BOT_USERNAMES:-}
-      WOODPECKER_TOKEN: ${WOODPECKER_TOKEN:-}
-      CLAUDE_TIMEOUT: ${CLAUDE_TIMEOUT:-7200}
-      CLAUDE_CODE_DISABLE_NONESSENTIAL_TRAFFIC: ${CLAUDE_CODE_DISABLE_NONESSENTIAL_TRAFFIC:-1}
-      CLAUDE_AUTOCOMPACT_PCT_OVERRIDE: "60"
-      ANTHROPIC_API_KEY: ${ANTHROPIC_API_KEY:-}
-      ANTHROPIC_BASE_URL: ${ANTHROPIC_BASE_URL:-}
-      FORGE_ADMIN_PASS: ${FORGE_ADMIN_PASS:-}
-      DISINTO_CONTAINER: "1"
-      PROJECT_NAME: ${PROJECT_NAME:-project}
-      PROJECT_REPO_ROOT: /home/agent/repos/${PROJECT_NAME:-project}
-      WOODPECKER_DATA_DIR: /woodpecker-data
-      WOODPECKER_REPO_ID: "PLACEHOLDER_WP_REPO_ID"
-      CLAUDE_CONFIG_DIR: ${CLAUDE_CONFIG_DIR:-/var/lib/disinto/claude-shared/config}
-      POLL_INTERVAL: ${POLL_INTERVAL:-300}
-      AGENT_ROLES: dev
-    healthcheck:
-      test: ["CMD", "pgrep", "-f", "entrypoint.sh"]
-      interval: 60s
-      timeout: 5s
-      retries: 3
-      start_period: 30s
-    depends_on:
-      forgejo:
-        condition: service_healthy
-    networks:
-      - disinto-net
-
-  agents-llama-all:
-    build:
-      context: .
-      dockerfile: docker/agents/Dockerfile
-    # Rebuild on every up (#887): makes docker/agents/ source changes reach this
-    # container without a manual \`docker compose build\`. Cache-fast when clean.
-    pull_policy: build
-    container_name: disinto-agents-llama-all
-    restart: unless-stopped
-    profiles: ["agents-llama-all"]
-    security_opt:
-      - apparmor=unconfined
-    volumes:
-      - agent-data:/home/agent/data
-      - project-repos:/home/agent/repos
-      - ${CLAUDE_SHARED_DIR:-/var/lib/disinto/claude-shared}:${CLAUDE_SHARED_DIR:-/var/lib/disinto/claude-shared}
-      - ${CLAUDE_CONFIG_FILE:-${HOME}/.claude.json}:/home/agent/.claude.json:ro
-      - ${CLAUDE_BIN_DIR}:/usr/local/bin/claude:ro
-      - ${AGENT_SSH_DIR:-${HOME}/.ssh}:/home/agent/.ssh:ro
-      - ${SOPS_AGE_DIR:-${HOME}/.config/sops/age}:/home/agent/.config/sops/age:ro
-      - woodpecker-data:/woodpecker-data:ro
-    environment:
-      FORGE_URL: http://forgejo:3000
-      FORGE_REPO: ${FORGE_REPO:-disinto-admin/disinto}
-      FORGE_TOKEN: ${FORGE_TOKEN_LLAMA:-}
-      FORGE_PASS: ${FORGE_PASS_LLAMA:-}
-      FORGE_REVIEW_TOKEN: ${FORGE_REVIEW_TOKEN:-}
-      FORGE_PLANNER_TOKEN: ${FORGE_PLANNER_TOKEN:-}
-      FORGE_GARDENER_TOKEN: ${FORGE_GARDENER_TOKEN:-}
-      FORGE_VAULT_TOKEN: ${FORGE_VAULT_TOKEN:-}
-      FORGE_SUPERVISOR_TOKEN: ${FORGE_SUPERVISOR_TOKEN:-}
-      FORGE_PREDICTOR_TOKEN: ${FORGE_PREDICTOR_TOKEN:-}
-      FORGE_ARCHITECT_TOKEN: ${FORGE_ARCHITECT_TOKEN:-}
-      FORGE_FILER_TOKEN: ${FORGE_FILER_TOKEN:-}
-      FORGE_BOT_USERNAMES: ${FORGE_BOT_USERNAMES:-}
-      WOODPECKER_TOKEN: ${WOODPECKER_TOKEN:-}
-      CLAUDE_TIMEOUT: ${CLAUDE_TIMEOUT:-7200}
-      CLAUDE_CODE_DISABLE_NONESSENTIAL_TRAFFIC: ${CLAUDE_CODE_DISABLE_NONESSENTIAL_TRAFFIC:-1}
-      CLAUDE_AUTOCOMPACT_PCT_OVERRIDE: "60"
-      CLAUDE_CODE_DISABLE_EXPERIMENTAL_BETAS: "1"
-      ANTHROPIC_API_KEY: ${ANTHROPIC_API_KEY:-}
-      ANTHROPIC_BASE_URL: ${ANTHROPIC_BASE_URL:-}
-      FORGE_ADMIN_PASS: ${FORGE_ADMIN_PASS:-}
-      DISINTO_CONTAINER: "1"
-      PROJECT_NAME: ${PROJECT_NAME:-project}
-      PROJECT_REPO_ROOT: /home/agent/repos/${PROJECT_NAME:-project}
-      WOODPECKER_DATA_DIR: /woodpecker-data
-      WOODPECKER_REPO_ID: "PLACEHOLDER_WP_REPO_ID"
-      CLAUDE_CONFIG_DIR: ${CLAUDE_CONFIG_DIR:-/var/lib/disinto/claude-shared/config}
-      POLL_INTERVAL: ${POLL_INTERVAL:-300}
-      GARDENER_INTERVAL: ${GARDENER_INTERVAL:-21600}
-      ARCHITECT_INTERVAL: ${ARCHITECT_INTERVAL:-21600}
-      PLANNER_INTERVAL: ${PLANNER_INTERVAL:-43200}
-      SUPERVISOR_INTERVAL: ${SUPERVISOR_INTERVAL:-1200}
-      AGENT_ROLES: review,dev,gardener,architect,planner,predictor,supervisor
-    healthcheck:
-      test: ["CMD", "pgrep", "-f", "entrypoint.sh"]
-      interval: 60s
-      timeout: 5s
-      retries: 3
-      start_period: 30s
-    depends_on:
-      forgejo:
-        condition: service_healthy
-      woodpecker:
-        condition: service_started
-    networks:
-      - disinto-net
-LLAMAEOF
-  fi
-
   # Resume the rest of the compose file (runner onward)
   cat >> "$compose_file" <<'COMPOSEEOF'
 

tests/disinto-init-nomad.bats

@@ -191,3 +191,122 @@ setup_file() {
   [ "$status" -ne 0 ]
   [[ "$output" == *"--empty and --with are mutually exclusive"* ]]
 }
+
+# ── --import-env / --import-sops / --age-key (S2.5, #883) ────────────────────
+#
+# Step 2.5 wires Vault policies + JWT auth + optional KV import into
+# `disinto init --backend=nomad`. The tests below exercise the flag
+# grammar (who-requires-whom + who-requires-backend=nomad) and the
+# dry-run plan shape (each --import-* flag prints its own path line,
+# independently). A prior attempt at this issue regressed the "print
+# every set flag" invariant by using if/elif — covered by the
+# "--import-env --import-sops --age-key" case.
+
+@test "disinto init --backend=nomad --import-env only is accepted" {
+  run "$DISINTO_BIN" init placeholder/repo --backend=nomad --import-env /tmp/.env --dry-run
+  [ "$status" -eq 0 ]
+  [[ "$output" == *"--import-env"* ]]
+  [[ "$output" == *"env file:  /tmp/.env"* ]]
+}
+
+@test "disinto init --backend=nomad --import-sops without --age-key errors" {
+  run "$DISINTO_BIN" init placeholder/repo --backend=nomad --import-sops /tmp/.env.vault.enc --dry-run
+  [ "$status" -ne 0 ]
+  [[ "$output" == *"--import-sops requires --age-key"* ]]
+}
+
+@test "disinto init --backend=nomad --age-key without --import-sops errors" {
+  run "$DISINTO_BIN" init placeholder/repo --backend=nomad --age-key /tmp/keys.txt --dry-run
+  [ "$status" -ne 0 ]
+  [[ "$output" == *"--age-key requires --import-sops"* ]]
+}
+
+@test "disinto init --backend=docker --import-env errors with backend requirement" {
+  run "$DISINTO_BIN" init placeholder/repo --backend=docker --import-env /tmp/.env
+  [ "$status" -ne 0 ]
+  [[ "$output" == *"--import-env, --import-sops, and --age-key require --backend=nomad"* ]]
+}
+
+@test "disinto init --backend=nomad --import-sops --age-key --dry-run shows import plan" {
+  run "$DISINTO_BIN" init placeholder/repo --backend=nomad --import-sops /tmp/.env.vault.enc --age-key /tmp/keys.txt --dry-run
+  [ "$status" -eq 0 ]
+  [[ "$output" == *"Vault import dry-run"* ]]
+  [[ "$output" == *"--import-sops"* ]]
+  [[ "$output" == *"--age-key"* ]]
+  [[ "$output" == *"sops file: /tmp/.env.vault.enc"* ]]
+  [[ "$output" == *"age key:   /tmp/keys.txt"* ]]
+}
+
+# When all three flags are set, each one must print its own path line —
+# if/elif regressed this to "only one printed" in a prior attempt (#883).
+@test "disinto init --backend=nomad --import-env --import-sops --age-key --dry-run shows full import plan" {
+  run "$DISINTO_BIN" init placeholder/repo --backend=nomad --import-env /tmp/.env --import-sops /tmp/.env.vault.enc --age-key /tmp/keys.txt --dry-run
+  [ "$status" -eq 0 ]
+  [[ "$output" == *"Vault import dry-run"* ]]
+  [[ "$output" == *"env file:  /tmp/.env"* ]]
+  [[ "$output" == *"sops file: /tmp/.env.vault.enc"* ]]
+  [[ "$output" == *"age key:   /tmp/keys.txt"* ]]
+}
+
+@test "disinto init --backend=nomad without import flags shows skip message" {
+  run "$DISINTO_BIN" init placeholder/repo --backend=nomad --dry-run
+  [ "$status" -eq 0 ]
+  [[ "$output" == *"no --import-env/--import-sops"* ]]
+  [[ "$output" == *"skipping"* ]]
+}
+
+@test "disinto init --backend=nomad --import-env --import-sops --age-key --with forgejo --dry-run shows all plans" {
+  run "$DISINTO_BIN" init placeholder/repo --backend=nomad --import-env /tmp/.env --import-sops /tmp/.env.vault.enc --age-key /tmp/keys.txt --with forgejo --dry-run
+  [ "$status" -eq 0 ]
+  [[ "$output" == *"Vault import dry-run"* ]]
+  [[ "$output" == *"Vault policies dry-run"* ]]
+  [[ "$output" == *"Vault auth dry-run"* ]]
+  [[ "$output" == *"Deploy services dry-run"* ]]
+}
+
+@test "disinto init --backend=nomad --dry-run prints policies + auth plan even without --import-*" {
+  run "$DISINTO_BIN" init placeholder/repo --backend=nomad --dry-run
+  [ "$status" -eq 0 ]
+  # Policies + auth run on every nomad path (idempotent), so the dry-run
+  # plan always lists them — regardless of whether --import-* is set.
+  [[ "$output" == *"Vault policies dry-run"* ]]
+  [[ "$output" == *"Vault auth dry-run"* ]]
+  [[ "$output" != *"Vault import dry-run"* ]]
+}
+
+# --import-env=PATH (=-form) must work alongside --import-env PATH.
+@test "disinto init --backend=nomad --import-env=PATH (equals form) works" {
+  run "$DISINTO_BIN" init placeholder/repo --backend=nomad --import-env=/tmp/.env --dry-run
+  [ "$status" -eq 0 ]
+  [[ "$output" == *"env file:  /tmp/.env"* ]]
+}
+
+# --empty short-circuits after cluster-up: no policies, no auth, no
+# import, no deploy. The dry-run plan must match that — cluster-up plan
+# appears, but none of the S2.x section banners do.
+@test "disinto init --backend=nomad --empty --dry-run skips policies/auth/import sections" {
+  run "$DISINTO_BIN" init placeholder/repo --backend=nomad --empty --dry-run
+  [ "$status" -eq 0 ]
+  # Cluster-up still runs (it's what --empty brings up).
+  [[ "$output" == *"Cluster-up dry-run"* ]]
+  # Policies + auth + import must NOT appear under --empty.
+  [[ "$output" != *"Vault policies dry-run"* ]]
+  [[ "$output" != *"Vault auth dry-run"* ]]
+  [[ "$output" != *"Vault import dry-run"* ]]
+  [[ "$output" != *"no --import-env/--import-sops"* ]]
+}
+
+# --empty + any --import-* flag silently does nothing (import is skipped),
+# so the CLI rejects the combination up front rather than letting it
+# look like the import "succeeded".
+@test "disinto init --backend=nomad --empty --import-env errors" {
+  run "$DISINTO_BIN" init placeholder/repo --backend=nomad --empty --import-env /tmp/.env --dry-run
+  [ "$status" -ne 0 ]
+  [[ "$output" == *"--empty and --import-env/--import-sops/--age-key are mutually exclusive"* ]]
+}
+
+@test "disinto init --backend=nomad --empty --import-sops --age-key errors" {
+  run "$DISINTO_BIN" init placeholder/repo --backend=nomad --empty --import-sops /tmp/.env.vault.enc --age-key /tmp/keys.txt --dry-run
+  [ "$status" -ne 0 ]
+  [[ "$output" == *"--empty and --import-env/--import-sops/--age-key are mutually exclusive"* ]]
+}