d2c6b33271
Wires S0.1–S0.3 into a single idempotent bring-up script and replaces
the S0.1 stub in _disinto_init_nomad so `disinto init --backend=nomad
--empty` produces a running empty single-node cluster on a fresh box.
lib/init/nomad/cluster-up.sh (new):
1. install.sh (nomad + vault binaries)
2. systemd-nomad.sh (unit + enable, not started)
3. systemd-vault.sh (unit + vault.hcl + enable)
4. host-volume dirs under /srv/disinto/* (matching nomad/client.hcl)
5. /etc/nomad.d/{server,client}.hcl (content-compare before write)
6. vault-init.sh (first-run init + unseal + persist keys)
7. systemctl start vault (poll until unsealed; fail-fast on
is-failed)
8. systemctl start nomad (poll until ≥1 node ready)
9. /etc/profile.d/disinto-nomad.sh (VAULT_ADDR + NOMAD_ADDR for
interactive shells)
Re-running on a healthy box is a no-op — each sub-step is itself
idempotent and steps 7/8 fast-path when already active + healthy.
`--dry-run` prints the full step list and exits 0.
bin/disinto:
- _disinto_init_nomad: replaces the S0.1 stub. Invokes cluster-up.sh
directly (as root) or via `sudo -n` otherwise. Both `--empty` and
the default (no flag) call cluster-up.sh today; Step 1 will branch
on $empty to gate job deployment. --dry-run forwards through.
- disinto_init: adds `--empty` flag parsing; rejects `--empty`
combined with `--backend=docker` explicitly instead of silently
ignoring it.
- usage: documents `--empty` and drops the "stub, S0.1" annotation
from --backend.
Closes #824.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
337 lines
14 KiB
Bash
Executable file
337 lines
14 KiB
Bash
Executable file
#!/usr/bin/env bash
|
||
# =============================================================================
|
||
# lib/init/nomad/cluster-up.sh — Empty Nomad+Vault cluster orchestrator (S0.4)
|
||
#
|
||
# Wires together the S0.1–S0.3 building blocks into one idempotent
|
||
# "bring up a single-node Nomad+Vault cluster" script:
|
||
#
|
||
# 1. install.sh (nomad + vault binaries)
|
||
# 2. systemd-nomad.sh (nomad.service — unit + enable, not started)
|
||
# 3. systemd-vault.sh (vault.service — unit + vault.hcl + enable)
|
||
# 4. Host-volume dirs (/srv/disinto/* matching nomad/client.hcl)
|
||
# 5. /etc/nomad.d/*.hcl (server.hcl + client.hcl from repo)
|
||
# 6. vault-init.sh (first-run init + unseal + persist keys)
|
||
# 7. systemctl start vault (auto-unseal via ExecStartPost; poll)
|
||
# 8. systemctl start nomad (poll until ≥1 ready node)
|
||
# 9. /etc/profile.d/disinto-nomad.sh (VAULT_ADDR + NOMAD_ADDR for shells)
|
||
#
|
||
# This is the "empty cluster" orchestrator — no jobs deployed. Subsequent
|
||
# Step-1 issues layer job deployment on top of this checkpoint.
|
||
#
|
||
# Idempotency contract:
|
||
# Running twice back-to-back on a healthy box is a no-op. Each sub-step
|
||
# is itself idempotent — see install.sh / systemd-*.sh / vault-init.sh
|
||
# headers for the per-step contract. Fast-paths in steps 7 and 8 skip
|
||
# the systemctl start when the service is already active + healthy.
|
||
#
|
||
# Usage:
|
||
# sudo lib/init/nomad/cluster-up.sh # bring cluster up
|
||
# sudo lib/init/nomad/cluster-up.sh --dry-run # print step list, exit 0
|
||
#
|
||
# Environment (override polling for slow boxes):
|
||
# VAULT_POLL_SECS max seconds to wait for vault to unseal (default: 30)
|
||
# NOMAD_POLL_SECS max seconds to wait for nomad node=ready (default: 60)
|
||
#
|
||
# Exit codes:
|
||
# 0 success (cluster up, or already up)
|
||
# 1 precondition or step failure
|
||
# =============================================================================
|
||
set -euo pipefail
|
||
|
||
SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
|
||
REPO_ROOT="$(cd "${SCRIPT_DIR}/../../.." && pwd)"
|
||
|
||
# Sub-scripts (siblings in this directory).
|
||
INSTALL_SH="${SCRIPT_DIR}/install.sh"
|
||
SYSTEMD_NOMAD_SH="${SCRIPT_DIR}/systemd-nomad.sh"
|
||
SYSTEMD_VAULT_SH="${SCRIPT_DIR}/systemd-vault.sh"
|
||
VAULT_INIT_SH="${SCRIPT_DIR}/vault-init.sh"
|
||
|
||
# In-repo Nomad configs copied to /etc/nomad.d/.
|
||
NOMAD_CONFIG_DIR="/etc/nomad.d"
|
||
NOMAD_SERVER_HCL_SRC="${REPO_ROOT}/nomad/server.hcl"
|
||
NOMAD_CLIENT_HCL_SRC="${REPO_ROOT}/nomad/client.hcl"
|
||
|
||
# /etc/profile.d entry — makes VAULT_ADDR + NOMAD_ADDR available to
|
||
# interactive shells without requiring the operator to source anything.
|
||
PROFILE_D_FILE="/etc/profile.d/disinto-nomad.sh"
|
||
|
||
# Host-volume paths — MUST match the `host_volume "..."` declarations
|
||
# in nomad/client.hcl. Adding a host_volume block there requires adding
|
||
# its path here so the dir exists before nomad starts (otherwise client
|
||
# fingerprinting fails and the node stays in "initializing").
|
||
HOST_VOLUME_DIRS=(
|
||
"/srv/disinto/forgejo-data"
|
||
"/srv/disinto/woodpecker-data"
|
||
"/srv/disinto/agent-data"
|
||
"/srv/disinto/project-repos"
|
||
"/srv/disinto/caddy-data"
|
||
"/srv/disinto/chat-history"
|
||
"/srv/disinto/ops-repo"
|
||
)
|
||
|
||
# Default API addresses — matches the listener bindings in
|
||
# nomad/server.hcl and nomad/vault.hcl. If either file ever moves
|
||
# off 127.0.0.1 / default port, update both places together.
|
||
VAULT_ADDR_DEFAULT="http://127.0.0.1:8200"
|
||
NOMAD_ADDR_DEFAULT="http://127.0.0.1:4646"
|
||
|
||
VAULT_POLL_SECS="${VAULT_POLL_SECS:-30}"
|
||
NOMAD_POLL_SECS="${NOMAD_POLL_SECS:-60}"
|
||
|
||
log() { printf '[cluster-up] %s\n' "$*"; }
|
||
die() { printf '[cluster-up] ERROR: %s\n' "$*" >&2; exit 1; }
|
||
|
||
# ── Flag parsing ─────────────────────────────────────────────────────────────
|
||
dry_run=false
|
||
while [ $# -gt 0 ]; do
|
||
case "$1" in
|
||
--dry-run) dry_run=true; shift ;;
|
||
-h|--help)
|
||
cat <<EOF
|
||
Usage: sudo $(basename "$0") [--dry-run]
|
||
|
||
Brings up an empty single-node Nomad+Vault cluster (idempotent).
|
||
|
||
--dry-run Print the step list without performing any action.
|
||
EOF
|
||
exit 0
|
||
;;
|
||
*) die "unknown flag: $1" ;;
|
||
esac
|
||
done
|
||
|
||
# ── Dry-run: print step list + exit ──────────────────────────────────────────
|
||
if [ "$dry_run" = true ]; then
|
||
cat <<EOF
|
||
[dry-run] Step 1/9: install nomad + vault binaries
|
||
→ sudo ${INSTALL_SH}
|
||
|
||
[dry-run] Step 2/9: write + enable nomad.service (NOT started)
|
||
→ sudo ${SYSTEMD_NOMAD_SH}
|
||
|
||
[dry-run] Step 3/9: write + enable vault.service + vault.hcl (NOT started)
|
||
→ sudo ${SYSTEMD_VAULT_SH}
|
||
|
||
[dry-run] Step 4/9: create host-volume dirs under /srv/disinto/
|
||
EOF
|
||
for d in "${HOST_VOLUME_DIRS[@]}"; do
|
||
printf ' → install -d -m 0755 %s\n' "$d"
|
||
done
|
||
cat <<EOF
|
||
|
||
[dry-run] Step 5/9: install /etc/nomad.d/server.hcl + client.hcl from repo
|
||
→ ${NOMAD_SERVER_HCL_SRC} → ${NOMAD_CONFIG_DIR}/server.hcl
|
||
→ ${NOMAD_CLIENT_HCL_SRC} → ${NOMAD_CONFIG_DIR}/client.hcl
|
||
|
||
[dry-run] Step 6/9: first-run vault init + persist unseal.key + root.token
|
||
→ sudo ${VAULT_INIT_SH}
|
||
|
||
[dry-run] Step 7/9: systemctl start vault + poll until unsealed (≤${VAULT_POLL_SECS}s)
|
||
|
||
[dry-run] Step 8/9: systemctl start nomad + poll until ≥1 node ready (≤${NOMAD_POLL_SECS}s)
|
||
|
||
[dry-run] Step 9/9: write ${PROFILE_D_FILE}
|
||
→ export VAULT_ADDR=${VAULT_ADDR_DEFAULT}
|
||
→ export NOMAD_ADDR=${NOMAD_ADDR_DEFAULT}
|
||
|
||
Dry run complete — no changes made.
|
||
EOF
|
||
exit 0
|
||
fi
|
||
|
||
# ── Preconditions ────────────────────────────────────────────────────────────
|
||
if [ "$(id -u)" -ne 0 ]; then
|
||
die "must run as root (spawns install/systemd/vault-init sub-scripts)"
|
||
fi
|
||
|
||
command -v systemctl >/dev/null 2>&1 \
|
||
|| die "systemctl not found (systemd required)"
|
||
|
||
for f in "$INSTALL_SH" "$SYSTEMD_NOMAD_SH" "$SYSTEMD_VAULT_SH" "$VAULT_INIT_SH"; do
|
||
[ -x "$f" ] || die "sub-script missing or non-executable: ${f}"
|
||
done
|
||
|
||
[ -f "$NOMAD_SERVER_HCL_SRC" ] \
|
||
|| die "source config not found: ${NOMAD_SERVER_HCL_SRC}"
|
||
[ -f "$NOMAD_CLIENT_HCL_SRC" ] \
|
||
|| die "source config not found: ${NOMAD_CLIENT_HCL_SRC}"
|
||
|
||
# ── Helpers ──────────────────────────────────────────────────────────────────
|
||
|
||
# install_file_if_differs SRC DST MODE
|
||
# Copy SRC to DST (root:root with MODE) iff on-disk content differs.
|
||
# No-op + log otherwise — preserves mtime, avoids spurious reloads.
|
||
install_file_if_differs() {
|
||
local src="$1" dst="$2" mode="$3"
|
||
if [ -f "$dst" ] && cmp -s "$src" "$dst"; then
|
||
log "unchanged: ${dst}"
|
||
return 0
|
||
fi
|
||
log "writing: ${dst}"
|
||
install -m "$mode" -o root -g root "$src" "$dst"
|
||
}
|
||
|
||
# vault_status_json — echo `vault status -format=json`, or '' on unreachable.
|
||
# vault status exit codes: 0 = unsealed, 2 = sealed/uninit, 1 = unreachable.
|
||
# We treat all of 0/2 as "reachable with state"; 1 yields empty output.
|
||
# Wrapped in `|| true` so set -e doesn't abort on exit 2 (the expected
|
||
# sealed-state case during first-boot polling).
|
||
vault_status_json() {
|
||
VAULT_ADDR="$VAULT_ADDR_DEFAULT" vault status -format=json 2>/dev/null || true
|
||
}
|
||
|
||
# vault_is_unsealed — true iff vault reachable AND initialized AND unsealed.
|
||
vault_is_unsealed() {
|
||
local out init sealed
|
||
out="$(vault_status_json)"
|
||
[ -n "$out" ] || return 1
|
||
init="$(printf '%s' "$out" | jq -r '.initialized' 2>/dev/null)" || init=""
|
||
sealed="$(printf '%s' "$out" | jq -r '.sealed' 2>/dev/null)" || sealed=""
|
||
[ "$init" = "true" ] && [ "$sealed" = "false" ]
|
||
}
|
||
|
||
# nomad_ready_count — echo the number of ready nodes, or 0 on error.
|
||
# `nomad node status -json` returns a JSON array of nodes, each with a
|
||
# .Status field ("initializing" | "ready" | "down" | "disconnected").
|
||
nomad_ready_count() {
|
||
local out
|
||
out="$(NOMAD_ADDR="$NOMAD_ADDR_DEFAULT" nomad node status -json 2>/dev/null || true)"
|
||
if [ -z "$out" ]; then
|
||
printf '0'
|
||
return 0
|
||
fi
|
||
printf '%s' "$out" \
|
||
| jq '[.[] | select(.Status == "ready")] | length' 2>/dev/null \
|
||
|| printf '0'
|
||
}
|
||
|
||
# ── Step 1/9: install.sh (nomad + vault binaries) ────────────────────────────
|
||
log "── Step 1/9: install nomad + vault binaries ──"
|
||
"$INSTALL_SH"
|
||
|
||
# ── Step 2/9: systemd-nomad.sh (unit + enable, not started) ──────────────────
|
||
log "── Step 2/9: install nomad.service (enable, not start) ──"
|
||
"$SYSTEMD_NOMAD_SH"
|
||
|
||
# ── Step 3/9: systemd-vault.sh (unit + vault.hcl + enable) ───────────────────
|
||
log "── Step 3/9: install vault.service + vault.hcl (enable, not start) ──"
|
||
"$SYSTEMD_VAULT_SH"
|
||
|
||
# ── Step 4/9: host-volume dirs matching nomad/client.hcl ─────────────────────
|
||
log "── Step 4/9: host-volume dirs under /srv/disinto/ ──"
|
||
# Parent /srv/disinto/ first (install -d handles missing parents, but being
|
||
# explicit makes the log output read naturally as a top-down creation).
|
||
install -d -m 0755 -o root -g root "/srv/disinto"
|
||
for d in "${HOST_VOLUME_DIRS[@]}"; do
|
||
if [ -d "$d" ]; then
|
||
log "unchanged: ${d}"
|
||
else
|
||
log "creating: ${d}"
|
||
install -d -m 0755 -o root -g root "$d"
|
||
fi
|
||
done
|
||
|
||
# ── Step 5/9: /etc/nomad.d/server.hcl + client.hcl ───────────────────────────
|
||
log "── Step 5/9: install /etc/nomad.d/{server,client}.hcl ──"
|
||
# systemd-nomad.sh already created /etc/nomad.d/. Re-assert for clarity +
|
||
# in case someone runs cluster-up.sh with an exotic step ordering later.
|
||
install -d -m 0755 -o root -g root "$NOMAD_CONFIG_DIR"
|
||
install_file_if_differs "$NOMAD_SERVER_HCL_SRC" "${NOMAD_CONFIG_DIR}/server.hcl" 0644
|
||
install_file_if_differs "$NOMAD_CLIENT_HCL_SRC" "${NOMAD_CONFIG_DIR}/client.hcl" 0644
|
||
|
||
# ── Step 6/9: vault-init (first-run init + unseal + persist keys) ────────────
|
||
log "── Step 6/9: vault-init (no-op after first run) ──"
|
||
# vault-init.sh spawns a temporary vault server if systemd isn't managing
|
||
# one, runs `operator init`, writes unseal.key + root.token, unseals once,
|
||
# then stops the temp server (EXIT trap). After it returns, port 8200 is
|
||
# free for systemctl-managed vault to take in step 7.
|
||
"$VAULT_INIT_SH"
|
||
|
||
# ── Step 7/9: systemctl start vault + poll until unsealed ────────────────────
|
||
log "── Step 7/9: start vault + poll until unsealed ──"
|
||
if systemctl is-active --quiet vault && vault_is_unsealed; then
|
||
log "vault already active + unsealed — skip start"
|
||
else
|
||
systemctl start vault
|
||
ready=0
|
||
for i in $(seq 1 "$VAULT_POLL_SECS"); do
|
||
# Fail fast if systemd has already marked the unit as failed — usually
|
||
# ExecStartPost tripping because unseal.key is absent / corrupted.
|
||
if systemctl is-failed --quiet vault; then
|
||
log "vault.service entered failed state — systemctl status follows:"
|
||
systemctl --no-pager --full status vault >&2 || true
|
||
die "vault.service failed to start"
|
||
fi
|
||
if vault_is_unsealed; then
|
||
log "vault unsealed after ${i}s"
|
||
ready=1
|
||
break
|
||
fi
|
||
sleep 1
|
||
done
|
||
if [ "$ready" -ne 1 ]; then
|
||
log "vault did not unseal within ${VAULT_POLL_SECS}s — status follows:"
|
||
systemctl --no-pager --full status vault >&2 || true
|
||
die "vault failed to become unsealed"
|
||
fi
|
||
fi
|
||
|
||
# ── Step 8/9: systemctl start nomad + poll until ≥1 node ready ───────────────
|
||
log "── Step 8/9: start nomad + poll until ≥1 node ready ──"
|
||
if systemctl is-active --quiet nomad && [ "$(nomad_ready_count)" -ge 1 ]; then
|
||
log "nomad already active + ≥1 node ready — skip start"
|
||
else
|
||
systemctl start nomad
|
||
ready=0
|
||
for i in $(seq 1 "$NOMAD_POLL_SECS"); do
|
||
if systemctl is-failed --quiet nomad; then
|
||
log "nomad.service entered failed state — systemctl status follows:"
|
||
systemctl --no-pager --full status nomad >&2 || true
|
||
die "nomad.service failed to start"
|
||
fi
|
||
if [ "$(nomad_ready_count)" -ge 1 ]; then
|
||
log "nomad has ready node after ${i}s"
|
||
ready=1
|
||
break
|
||
fi
|
||
sleep 1
|
||
done
|
||
if [ "$ready" -ne 1 ]; then
|
||
log "nomad had no ready nodes within ${NOMAD_POLL_SECS}s — status follows:"
|
||
systemctl --no-pager --full status nomad >&2 || true
|
||
die "nomad failed to reach ≥1 ready node"
|
||
fi
|
||
fi
|
||
|
||
# ── Step 9/9: /etc/profile.d/disinto-nomad.sh ────────────────────────────────
|
||
log "── Step 9/9: write ${PROFILE_D_FILE} ──"
|
||
# Shell rc fragments in /etc/profile.d/ are sourced by /etc/profile for
|
||
# every interactive login shell. Setting VAULT_ADDR + NOMAD_ADDR here means
|
||
# the operator can run `vault status` / `nomad node status` straight after
|
||
# `ssh factory-box` without fumbling env vars.
|
||
desired_profile="# /etc/profile.d/disinto-nomad.sh — written by lib/init/nomad/cluster-up.sh
|
||
# Interactive-shell defaults for Vault + Nomad clients on this box.
|
||
export VAULT_ADDR=${VAULT_ADDR_DEFAULT}
|
||
export NOMAD_ADDR=${NOMAD_ADDR_DEFAULT}
|
||
"
|
||
if [ -f "$PROFILE_D_FILE" ] \
|
||
&& printf '%s' "$desired_profile" | cmp -s - "$PROFILE_D_FILE"; then
|
||
log "unchanged: ${PROFILE_D_FILE}"
|
||
else
|
||
log "writing: ${PROFILE_D_FILE}"
|
||
# Subshell + EXIT trap: guarantees the tempfile is cleaned up on both
|
||
# success AND set-e-induced failure of `install`. A function-scoped
|
||
# RETURN trap does NOT fire on errexit-abort in bash — the subshell is
|
||
# the reliable cleanup boundary here.
|
||
(
|
||
tmp="$(mktemp)"
|
||
trap 'rm -f "$tmp"' EXIT
|
||
printf '%s' "$desired_profile" > "$tmp"
|
||
install -m 0644 -o root -g root "$tmp" "$PROFILE_D_FILE"
|
||
)
|
||
fi
|
||
|
||
log "── done: empty nomad+vault cluster is up ──"
|
||
log " Vault: ${VAULT_ADDR_DEFAULT} (Sealed=false Initialized=true)"
|
||
log " Nomad: ${NOMAD_ADDR_DEFAULT} (≥1 node ready)"
|